|You have no items in your cart.|
Lev Check Wave-Soldering Gage, 8" x 10" x 1/8", 1/2" Parallel Grid Lines
- HMC# LC810
- MFR# LC-810
A simple, precise gage for measuring, monitoring and adjusting the solder wave contact on automatic wave soldering equipment.
During use, the tempered-glass panel is installed in the conveyor to simulate a board passing over the fluxer, pre-heater and solder-wave. Lev Check® gages are made from clear glass, so wave shape, wave turbulence, flux coverage, and other critical factors can be observed from "topside". The gage's heat-resistant calibration grid enables very accurate level adjustments to be made to the transport system.
Chose a gauge size that is close to the width of the actual wave. Optional edge brackets are available to convert panels to 1/16" where necessary to fit holding fixtures.