Combines 400 watts of power over three independently controlled channels with innovative features such as automatic tool detection, temperature pre-selection buttons for each channel, and factory calibration check. Air and vacuum ports allow simultaneous operation of soldering, desoldering, and hot air rework handpieces. Large, intuitive LCD display shows critical functions for all three channels. Soldering and desoldering temperatures are digitally adjustable from 150°F to 850°F and are maintained by superior sensor and heat-transfer technology. Self-contained internal vacuum pump generates 20.7" Hg of vacuum pressure and airflow of 1 to 15 liters/min., eliminating the need for shop air. Vacuum pickup pen easily and safely handles SMT components and other small parts. USB port allows the use of included PC software for data logging. The WR3000M rework station operates on 120VAC, and is ESD-safe. Comes with power unit (Model WR3M), 80W soldering iron (Model WP80 with LTB tip) and stand (P/N WDH10T), 80W inline desoldering tool (Model DXV80 with DX113HM high mass tiplet) and stand (P/N WDH30), 200W HAP200 hot air pencil (Model HAP200 with 3mm nozzle) and stand (P/N WDH30), and vacuum pickup pen with USB cable and PC software (Model WVP). Station is also compatible with Weller high speed micro tools (WMRP soldering iron; and WMRT desoldering “hot” tweezers).