These anaerobic adhesives are used to bond and increase the shear strength of non-threaded, cylindrical metal assemblies. Fills the inner voids in close-fitting press fits, keyways, and splines. Allows you to mount bearings and bushings, and make press fits even stronger. Formulated in a selection of viscosities, gap filling ability, flexibility, and strength characteristics. Typical temperature range is -65°F to 300°F. General purpose Formula 609 is a low-viscosity, fast-curing adhesive used for bonding rigid metal assemblies. High temperature Formula 620 has the capability to operate at 450°F for long periods. It fixtures in 60 minutes at room temperature, but requires a secondary heat cure to generate high temperature resistance. Quick MetalŪ Formula 660 is a creamy, non-running gel that is applied onto cylindrical parts to fill surface imperfections and repair worn areas. High strength Formula 680 provides a shear strength of 4000 psi after 24 hours.

View a printer-friendly PDF of this page from our Buyer's Guide product catalog.

 Representative Description and Image
The description and image shown may not be not that of the actual part number 66040LOC. More.