|
|
 Catalog Page 88
|
|
|
|
These anaerobic adhesives are used to bond and
increase the shear strength of non-threaded,
cylindrical metal assemblies. Fills the
inner voids in close-fitting press fits,
keyways, and splines. Allows you to
mount bearings and bushings, and
make press fits even stronger.
Formulated in a selection of
viscosities, gap filling ability,
flexibility, and strength
characteristics. Typical
temperature range is -65°F to
300°F. General purpose Formula
609 is a low-viscosity, fast-curing
adhesive used for bonding rigid
metal assemblies. High temperature Formula 620 has the
capability to operate at 450°F for long periods. It fixtures in 60 minutes at room
temperature, but requires a secondary heat cure to generate high temperature
resistance. Quick MetalŪ Formula 660 is a creamy, non-running gel that is applied onto
cylindrical parts to fill surface imperfections and repair worn areas. High strength
Formula 680 provides a shear strength of 4000 psi after 24 hours.
Note: Description and image shown may not be that of Loctite part number 68035. More
| |
|
|
|
|
Products | About Us | Line Card | Browse Catalog | Free Catalog | Help | Contact Us 
