This water-based, polyurethane formula dissipates
static charge on concrete and other unfinished hard floor surfaces. Once
applied, it withstands alcohol, oils, gasoline, brake fluid, anti-freeze,
flux, and most common electronic chemicals. Resists yellowing, color
fading, and is biodegradable. Surface resistivity measures 105 - 108 ohms/sq. Apply
coating with roller, brush, spray gun, or squeegee. After application,
simply clean equipment with soap and water. Color: gray. Floors should be
primed with ACL 10R primer before applying Staticide®Diamond
coating. This clear, penetrating, ready-to-use, non-toxic primer provides
long lasting protection against damage associated with water penetration
for a variety of horizontal and vertical surfaces, especially concrete
(should be used with non-sealed concrete floors only).
Representative Description and Image
The description and image shown may not be not that of the actual part number 10R5. More.
)
